Friday, 15 November 2013

Radio


Radio is the wireless transmission of signals through free space byelectromagnetic radiation of a frequency significantly below that ofvisible light, in the radio frequency range, from about 30 kHz to 300 GHz. These waves are called radio waves. Electromagnetic radiation travels by means of oscillating electromagnetic fields that pass through the air and the vacuum of space.
Information, such as sound, is carried by systematically changing (modulating) some property of the radiated waves, such as their amplitude, frequency, phase, or pulse width. When radio waves strike an electrical conductor, the oscillating fields induce an alternating current in the conductor. The information in the waves can be extracted and transformed back into its original form.

Radio band
Main article: Radio frequency
Light Comparison
Name
Wavelength
Frequency (Hz)
Photon Energy (eV)
Gamma ray
less than 0.01 nm
more than 10 EHZ
100 keV - 300+ GeV
X-Ray
0.01 to 10 nm
30 PHz - 30 EHZ
120 eV to 120 keV
Ultraviolet
10 nm - 400 nm
30 EHZ - 790 THz
3 eV to 124 eV
Visible
390 nm - 750 nm
790 THz - 405 THz
1.7 eV - 3.3 eV
Infrared
750 nm - 1 mm
405 THz - 300 GHz
1.24 meV - 1.7 eV
Microwave
1 mm - 1 meter
300 GHz - 300 MHz
1.24 meV - 1.24 µeV
Radio
1 mm - km
300 GHz - 3 Hz
1.24 meV - 12.4 feV
Radio frequencies occupy the range from a few hertz to 300 GHz, although commercially important uses of radio use only a small part of this spectrum. Other types of electromagnetic radiation, with frequencies above the RF range, are infrared, visible light,ultraviolet, X-rays and gamma rays. Since the energy of an individual photon of radio frequency is too low to remove an electron from an atom, radio waves are classified as non-ionizing radiation.



Telephony

Mobile phones transmit to a local cell site (transmitter/receiver) that ultimately connects to the public switched telephone network (PSTN) through an optic fiber or microwave radio and other network elements. When the mobile phone nears the edge of the cell site's radio coverage area, the central computer switches the phone to a new cell. Cell phones originally used FM, but now most use various digital modulation schemes. Recent developments in Sweden (such as DROPme) allow for the instant downloading of digital material from a radio broadcast (such as a song) to a mobile phone.
Satellite phones use satellites rather than cell towers to communicate.



Video

Television sends the picture as AM and the sound as AM or FM, with the sound carrier a fixed frequency (4.5 MHz in the NTSC system) away from the video carrier. Analog television also uses a vestigial sideband on the video carrier to reduce the bandwidth required.
Digital television uses 8VSB modulation in North America (under the ATSC digital television standard), and COFDM modulation elsewhere in the world (using the DVB-T standard). A Reed–Solomon error correction code adds redundant correction codes and allows reliable reception during moderate data loss. Although many current and future codecs can be sent in the MPEG transport stream container format, as of 2006 most systems use a standard-definition format almost identical to DVD: MPEG-2 video in Anamorphic widescreen and MPEG layer 2 (MP2) audio. High-definition television is possible simply by using a higher-resolution picture, but H.264/AVC is being considered as a replacement video codec in some regions for its improved compression. With the compression and improved modulation involved, a single "channel" can contain a high-definition program and several standard-definition programs.



Navigation

All satellite navigation systems use satellites with precision clocks. The satellite transmits its position, and the time of the transmission. The receiver listens to four satellites, and can figure its position as being on a line that is tangent to a spherical shell around each satellite, determined by the time-of-flight of the radio signals from the satellite. A computer in the receiver does the math.
Radio direction-finding is the oldest form of radio navigation. Before 1960 navigators used movable loop antennas to locate commercial AM stations near cities. In some cases they used marine radiolocation beacons, which share a range of frequencies just above AM radio with amateur radio operators. LORAN systems also used time-of-flight radio signals, but from radio stations on the ground.
VOR (Very High Frequency Omnidirectional Range), systems (used by aircraft), have an antenna array that transmits two signals simultaneously. A directional signal rotates like a lighthouse at a fixed rate. When the directional signal is facing north, an omnidirectional signal pulses. By measuring the difference in phase of these two signals, an aircraft can determine its bearing or radial from the station, thus establishing a line of position. An aircraft can get readings from two VORs and locate its position at the intersection of the two radials, known as a "fix."
When the VOR station is collocated with DME (Distance Measuring Equipment), the aircraft can determine its bearing and range from the station, thus providing a fix from only one ground station. Such stations are called VOR/DMEs. The military operates a similar system of navaids, called TACANs, which are often built into VOR stations. Such stations are called VORTACs. Because TACANs include distance measuring equipment, VOR/DME and VORTAC stations are identical in navigation potential to civil aircraft.



Radar

Radar (Radio Detection And Ranging) detects objects at a distance by bouncing radio waves off them. The delay caused by the echo measures the distance. The direction of the beam determines the direction of the reflection. The polarization and frequency of the return can sense the type of surface. Navigational radars scan a wide area two to four times per minute. They use very short waves that reflect from earth and stone. They are common on commercial ships and long-distance commercial aircraft.
General purpose radars generally use navigational radar frequencies, but modulate and polarize the pulse so the receiver can determine the type of surface of the reflector. The best general-purpose radars distinguish the rain of heavy storms, as well as land and vehicles. Some can superimpose sonar data and map data from GPS position.
Search radars scan a wide area with pulses of short radio waves. They usually scan the area two to four times a minute. Sometimes search radars use the Doppler effect to separate moving vehicles from clutter. Targeting radars use the same principle as search radar but scan a much smaller area far more often, usually several times a second or more. Weather radars resemble search radars, but use radio waves with circular polarization and a wavelength to reflect from water droplets. Some weather radar use the Doppler effect to measure wind speeds.

Data (digital radio)
Most new radio systems are digital, see also: Digital TV, Satellite Radio, Digital Audio Broadcasting. The oldest form of digital broadcast was spark gap telegraphy, used by pioneers such as Marconi. By pressing the key, the operator could send messages in Morse code by energizing a rotating commutating spark gap. The rotating commutator produced a tone in the receiver, where a simple spark gap would produce a hiss, indistinguishable from static. Spark-gap transmitters are now illegal, because their transmissions span several hundred megahertz. This is very wasteful of both radio frequencies and power.
The next advance was continuous wave telegraphy, or CW (Continuous Wave), in which a pure radio frequency, produced by a vacuum tube electronic oscillator was switched on and off by a key. A receiver with a local oscillator would "heterodyne" with the pure radio frequency, creating a whistle-like audio tone. CW uses less than 100 Hz of bandwidth. CW is still used, these days primarily by amateur radio operators (hams). Strictly, on-off keying of a carrier should be known as "Interrupted Continuous Wave" or ICW or on-off keying (OOK).

Radio teletype equipment usually operates on short-wave (HF) and is much loved by the military because they create written information without a skilled operator. They send a bit as one of two tones using frequency-shift keying. Groups of five or seven bits become a character printed by a teleprinter. From about 1925 to 1975, radioteletype was how most commercial messages were sent to less developed countries. These are still used by the military and weather services.
Aircraft use a 1200 Baud radioteletype service over VHF to send their ID, altitude and position, and get gate and connecting-flight data. Microwave dishes on satellites, telephone exchanges and TV stations usually use quadrature amplitude modulation(QAM). QAM sends data by changing both the phase and the amplitude of the radio signal. Engineers like QAM because it packs the most bits into a radio signal when given an exclusive (non-shared) fixed narrowband frequency range. Usually the bits are sent in "frames" that repeat. A special bit pattern is used to locate the beginning of a frame.

Communication systems that limit themselves to a fixed narrowband frequency range are vulnerable to jamming. A variety of jamming-resistant spread spectrum techniques were initially developed for military use, most famously for Global Positioning System satellite transmissions. Commercial use of spread spectrum began in the 1980s.Bluetooth, most cell phones, and the 802.11b version of Wi-Fi each use various forms of spread spectrum.
Systems that need reliability, or that share their frequency with other services, may use "coded orthogonal frequency-division multiplexing" or COFDM. COFDM breaks a digital signal into as many as several hundred slower subchannels. The digital signal is often sent as QAM on the subchannels. Modern COFDM systems use a small computer to make and decode the signal with digital signal processing, which is more flexible and far less expensive than older systems that implemented separate electronic channels.
COFDM resists fading and ghosting because the narrow-channel QAM signals can be sent slowly. An adaptive system, or one that sends error-correction codes can also resist interference, because most interference can affect only a few of the QAM channels. COFDM is used for Wi-Fi, some cell phones, Digital Radio Mondiale, Eureka 147, and many other local area network, digital TV and radio standards.



Types of Calendar


The motion (or apparent motion) of the Sun and the Moon provide temporal cycles which have strongly influenced the design of most calendars, which usually attempt to accord either with the solar cycle (the cycle of the seasons) or with the lunar cycle (the cycle of the phases of the Moon) or with both. There are over forty calendars currently in use, and many others that have been used or have been invented. They thus come in many forms. They may be divided into six kinds:
1. Purely lunar calendars
Those which are based on the natural cycles of the Moon, which have months which attempt to stay as closely as possible in sync with the lunar phases, and whose years (composed of months) have no close relation with the solar cycle, for example, the Muslim Calendar.
2. Purely solar calendars
Those which are based on the cycle of the seasons, which results from the motion of the Earth around the Sun (and the fact that the Earth's axis of rotation is tilted significantly with respect to the Earth's plane of rotation about the Sun). These calendars have years which accord with the seasonal cycle and begin at or near a fixed point in that cycle (for example, the vernal equinox). Years in a purely solar calendar may be composed of months, but the months have little if any connection with the lunar cycle, for example, the Common Era Calendar (the Gregorian Calendar with years designated according to the astronomical system) commonly in use today.
3. Lunisolar calendars
These calendars aim to be both solar calendars and lunar calendars, but are more successful in tracking the seasonal cycle than the lunar cycle. Such a calendar consists of years which accord closely with the seasonal cycle and months which accord more-or-less closely with the lunar cycle. An example of a lunisolar calendar is the Liberalia Triday Calendar(which is unusual in that it has both a solar calendrical component and a lunar calendrical component, the solar component being more accurate than the lunar).
Months in the Common Era Calendar are too discrepant with the lunar cycle for this calendar to be considered a lunisolar calendar (indeed the use of the term "month" in connection with this calendar is a misnomer, since the months have practically no connection to the lunar cycles beyond the fact that they are generally a day or two longer).
4. Solilunar calendars
These calendars aim to be both solar calendars and lunar calendars, but are more successful in tracking the lunar cycle than the seasonal cycle. They consist of months which accord closely with the lunar cycle and years which accord more-or-less closely with the seasonal cycle, for example, the Chinese Calendar, the Jewish Calendar and the Meyer-Palmen Solilunar Calendar. (However there may not be much point in distinguishing solilunar calendars from lunisolar calendars; they can all be termed lunisolar calendars.)
5. Other calendars
These calendars apparently make little or no attempt to accord with the cycles of the Moon or of the Sun. For example, the Tzolkin and the Long Count in the Maya Calendar. Some of these calendars may accord with other astronomical cycles, such as that associated with the planet Venus.
One calendrical scholar (Lance Latham) has suggested that a classification of calendars should also include the category of 'luni-stellar'. According to Richard Parker the Egyptian Calendar was such a calendar, and Latham has "found references to a luni-stellar calendar in use by the Loango, a West African tribe (Sirius) and some references to another such calendar in use by Mexican coastal tribes in the early 16th century (the Pleiades)."

Calendars may also be divided into three kinds according to whether or not they depend on the times of astronomical events, and if so whether those times are observed or calculated:
1. Calendars based on rules

These calendars are specified completely in terms of rules which are independent of astronomical events, for example, how many months are in a year, how many days are in each month, etc. Once a calendar date is associated with a particular day (in common experience) then the dates of all other days before and after that day can be calculated simply be the application of the rules. Examples are the Gregorian Calendar, the Julian Calendar and the Maya Calendar.
2. Calendars based on astronomical observation
These calendars require either observation of celestial phenomena (for example, the first appearance of the crescent moon after a dark moon, the astronomical conjunction of Sun and Moon) in order to decide, for example, when a month should begin, or when an extra month should be inserted in the calendar. The Islamic Calendar is a calendar of this type.
3. Calendars based on astronomical calculation
These calendars may originally have been based on astronomical observation but, with the development of astronomical theory, calculation of the times of astronomical events has replaced observation. Examples are the Jewish Calendar andthe Chinese Calendar. The latter depends on the exact times of dark moons and what are called "solar terms" (which divide the solar year into 24 parts). With refinements in astronomical knowledge the calendar may change with the introduction of different methods of calculating the exact times of astronomical events.

Citation: http://www.hermetic.ch/cal_stud/lunarcal/types.htm

Wednesday, 13 November 2013

Homework


 Homework, or homework assignment, refers to tasks assigned to students by their teachers to be completed outside the class. Common homework assignments may include a quantity or period of reading to be performed,writing or typing to be completed, problems to be solved, a school project to be built (such as a diorama or display), or other skills to be practiced.



Teaching and homework effectiveness

Student learning improves when homework serves a clear purpose and is matched to both the skills of each individual student and to the current topics being taught in class. Feedback improves the effectiveness of homework, especially when given in a timely manner (within 24 hours). Effective feedback improves student learning by correcting misunderstanding, validating process, and highlighting errors in thinking. Embedded comments provide much better feedback than a mere grade at the top of the paper. Homework must be concentrated to be effective: mastering takes days or weeks of practice. Fifty-percent mastery may be achieved after 4 practice sessions, but it takes 28 practice sessions to achieve approximately the eighty-percent mastery level.
Another way teachers can be more effective is by alerting parents to their students' homework, giving parents a chance to become familiar with the material and their child's progress. This also encourages parents to become involved in the homework process.Messages tend to get lost in transit or even altered when using "pupil post" (passing verbal messages or written notes back and forth using the student as courier), and therefore direct communication is much more effective and prevents frustration all around. Methods available for directly reporting homework assignments (to both students and their parents) include the phone, email, and centralized web-pages.

History of homework

In the United States

Historically, homework was frowned upon in American culture. With few students interested in higher education, and due to the necessity to complete daily chores, homework was discouraged not only by parents, but also by school districts. In 1901, the Californialegislature passed an act that effectively abolished homework for those who attended kindergarten through the eighth grade. But, in the 1950s, with increasing pressure on the United States to stay ahead in the Cold War, homework made a resurgence, and children were encouraged to keep up with their Russian counterparts. By the end of the Cold War in the early 1990s, the consensus in American education was overwhelmingly in favor of issuing homework to students of all grade levels.
In a study done at the University of Michigan in 2007, research concluded that the amount of homework given is increasing over time. In a sample taken of students between the ages of 6 and 9, it was shown that students spend more than two hours a week on homework, as opposed to 44 minutes in 1981.
Harris Cooper, nations top homework scholar, concluded after a comprehensive review that homework does not improve academic achievements for grade school students. Cooper analyzed dozens of students and found that kids who are assigned homework in middle and high school actually score "somewhat" better on standardized tests, but that kids who do 60 to 90 minutes of homework in middle school and more than 2 hours in high school actually score worse.

Internet homework resources

There are many homework-related resources available on the World Wide Web.There are web sites dedicated to communicating about homework, for teachers to post assignments on-line for students, and to keep parents informed. Many schools host their own homework posting services on their websites. There are non-profit organizations on-line that help students with their homework for free. There are also tutorials on most school subjects, especially math, which students can use if they don't understand their homework assignments.

Many libraries provide on-line resources which present subjects specifically for students who are looking for something to write about. And there are archives of ready-made homework assignments, including handouts, which teachers can use to provide homework to their students. Many other websites are used for research, especially search engines, such as Google, and encyclopedias.
Apart from above given resources there are hundreds of websites who are providing homework help at nominal rates. Such websites claim to help students understand concepts.
Some parents choose to monitor their students' usage of the internet, as some of the sites may be found deceptive or inappropriate by academic institutions. Also, Internet resources offer students a wealth of opportunity for plagiarism.


Tuesday, 12 November 2013

Charlie and the Chocolate Factory

Charlie and the Chocolate Factory

First American edition, 1964
Author
Illustrator
Joseph Schindelman (first US edition)
Faith Jaques (first UK edition)
Michael Foreman (1985 edition)
Quentin Blake (1995 edition)
Country
United Kingdom
Language
English
Welsh
Genre
Publisher
Alfred A. Knopf, Inc. (original)
Penguin Books (current)
Publication date
·         1964 (U.S.)
·         1967 (UK)
Media type
Print (Hardback, Paperback)
Pages
155
OCLCNumber
Followed by
This article is about the novel. For other uses, see Charlie and the Chocolate Factory (disambiguation).

"Mr. Bucket, Charlie's father" redirects here. It is not to be confused with Mr. Bucket. Charlie and the Chocolate Factory is a 1964 children's book by British author Roald Dahl. The story features the adventures of young Charlie Bucket inside the chocolatefactory of eccentric chocolatier Willy Wonka.
Charlie and the Chocolate Factory was first published in the United States by Alfred A. Knopf, Inc. in 1964 and in the United Kingdom by George Allen & Unwin in 1967. The book was adapted into two major motion pictures: Willy Wonka & the Chocolate Factory in 1971, and Charlie and the Chocolate Factory in 2005. The book's sequel, Charlie and the Great Glass Elevator, was written by Roald Dahl in 1972. Dahl had also planned to write a third book in the series but never finished it.
The story was originally inspired by Roald Dahl's experience of chocolate companies during his schooldays. Cadbur would often send test packages to the schoolchildren in exchange for their opinions on the new products. At that time (around the 1920s), Cadbury and Rowntree'swere England's two largest chocolate makers and they each often tried to steal trade secrets by sending spies, posing as employees, into the other's factory. Because of this, both companies became highly protective of their chocolate-making processes. It was a combination of this secrecy and the elaborate, often gigantic, machines in the factory that inspired Dahl to write the story.